LUXWAVE

How it works.

A luminaire emits an address, a badge reads it and sends it back, and the lighting relays it to your tools. Three functions build on this chain: lone worker protection, proof of presence and LUXLINK.

  1. 1Emission
  2. 2Transmission
  3. 3Lone worker
  4. 4Proof of presence
  5. 5LUXLINK

The chain, at a glance

From light to your tools, in four steps.

  1. ZONE B-12
    The luminaire emitsThe Point Service writes the zone’s address into the light.
  2. B-12
    The badge readsUnder the lighting, it reads this address. No cameras, no action needed.
  3. The lighting relaysThe badge sends it back by radio; the Point Services pass it from light to light.
  4. Room B-12 · 10:42
    Your tools receiveThe gateway delivers it to your servers: monitoring, maintenance, digital building model.

1Emission

Light carries an address.

Each Point Service modulates its luminaire’s light to write an identifier into it: this is visible light communication, or VLC. The luminaire provides light, and also tells you where you are.

  • One zone, one addressLight stops at the wall: the address read is that of the room, not the one next door.
  • As precise as the opticsA room’s lighting gives the zone. An adjustable-focus spotlight narrows the address down to a doorway or a workstation.
  • In the luminaire, retrofit or new buildThe Point Service is powered by the lighting. No data cables to run.

On demonstration

123
  1. Luminaire power supply
  2. Point Service
  3. Light source
The Point Service in the luminaire, next to the power supply. Illustrative rendering.

2Transmission

The badge reads, the lighting relays.

The badge sends the address it has read back by radio, using Bluetooth Low Energy (BLE). The Point Services pick it up and pass it on from one to the next, over a mesh network, to the gateway.

  • Always picked upEach Point Service has two radios: one picks up badges continuously, the other carries the mesh network.
  • Even with no mobile coverageInformation passes from light to light. It does not need the mobile network.
  • Lights off, network onThe network detects an arriving badge and switches the lighting back on. Where there is no one, the light stays off.
  • Through to your toolsThe gateway connects the lighting network to your servers, through open interfaces.

On demonstration

A LUXWAVE gateway on a wall shelf, connected to the site network.
The gateway: the only way out of the lighting network. Illustrative rendering.

What the chain makes possible

Three functions, on the same lighting.

Nothing to add to the building: the same luminaires, the same badges, the same gateway.

3Lone worker protection

The luminaire verifies the alarm.

The badge detects a fall, prolonged lack of movement (man down) or an SOS call. Before the alert goes out, the nearest luminaire questions the technician by voice.

  1. The badge detectsA fall, prolonged lack of movement or a deliberate SOS call.
  2. The luminaire asks“Can you hear me?” With one press on the badge, the technician cancels the alert.
  3. The alert goes out with the addressBuilding, floor, room, time.
  4. Emergency responders go to the right doorThey are guided to the room, without searching.
  • Even with no mobile signalThe alert travels over the lighting network: boiler rooms, tunnels, underground car parks.

On demonstration

In a plant room, the luminaire questions a technician who has fallen to the floor.
The luminaire questions the technician. Still from the 3D demonstration film.

4Proof of presence (PoL)

Being there can be proven.

PoL stands for proof of location: proof of presence. To attest that it was there, the badge must be in the light of the luminaire: the proof comes from the place, not from a declaration.

On demonstration

A badge placed in the beam of a spotlight.
Photo from a test: the badge reads the light of an adjustable-focus spotlight.

Overview

The flows, from light point to applications.

VLCBLEVLCBLEBadges and trackersMonitoringLUXLINKYour security deskYour softwareBuildingmanagementsystem (BMS)CONTROLDigitalbuildingmodel (BIM)BIM FLOWMaintenance(CMMS)Access controlPoint ServiceThe lighting network: from point to point, over anOpenThread radio mesh network, even with no mobile coverage.GatewayThe only way out ofthe lighting network.Where there is no one,the light stays off.Through open interfaces, toyour servers and your tools.Light carries the zone’s address (VLC).By radio, using Bluetooth Low Energy (BLE).The lighting network: from point topoint, over an OpenThread radio meshnetwork, even with no mobile coverage.Point ServiceVLCBLEVLCBLEBadges and trackersLight carries thezone’s address (VLC).By radio, using BluetoothLow Energy (BLE).Gateway: the only way outof the lighting network.Through open interfaces, toyour servers and your tools.MonitoringLUXLINKYour security deskYour softwareBuildingmanagementsystem (BMS)CONTROLDigitalbuildingmodel (BIM)BIM FLOWMaintenance(CMMS)Access control
The diagram, as text
  1. Badges and trackers

    Worn by a person or attached to equipment.

    They read the zone’s address in the light.

  2. From the Point Service to the badge: Light carries the zone’s address (VLC).

    From the badge to the Point Service: By radio, using Bluetooth Low Energy (BLE).

  3. Point Service

    In the luminaire, retrofit or new build.

    • It writes the zone’s address into the light.
    • It picks up the badges present.
    • It controls the lighting: scenes, dimming, switch-on on arrival.
  4. From the Point Services to the gateway: The lighting networkFrom point to point, over an OpenThread radio mesh network, even with no mobile coverage.

  5. Gateway

    The only way out of the lighting network.

From the gateway to your tools: Through open interfaces, to your servers and your tools.

Your applications

  • MonitoringOn the plan: every device, down to the room and on the right floor.
  • LUXLINKThe shared 3D plan, the video call.
  • Your security deskThe alert, with the room’s address.
  • Your softwareProof, dated and sorted by place.

Third-party systems

  • Building management system (BMS)ControlActual occupancy, zone by zone: the building management system adjusts the heating and ventilation setpoints.
  • Digital building model (BIM)BIM flowThe digital building model in IFC format: the badge places the technician in it.
  • Maintenance (CMMS)
  • Access control

Abbreviations on this page

VLC
Communication through visible light (visible light communication).
BLE
Low-energy Bluetooth radio (Bluetooth Low Energy).
PTI
French acronym for lone worker protection, printed on the lone worker badge.
PoL
Proof of presence (proof of location).
IFC
Exchange format for the digital building model.

What next?

See the light at work.

A demonstration on site or remotely, based on your lighting plans.

The location, what you want to solve, your timescales: enough to prepare the demonstration. 1,500 characters at most.
Answer in digits.